Northwood Studio
Bristol, United Kingdom
One-off · Completed March 2026
Oak dining table
Made by Anna Hale at Northwood Studio
- Width
- 2200 mm (86 5/8")
- Depth
- 950 mm (37 3/8")
- Height
- 750 mm (29 1/2")
- Weight
- 68 kg (150 lb)
Made from
- Supplier document
European oak (Quercus robur)
Poland · air dried, then kiln dried · 9% moisture
- Maker’s declaration
Hardwax oil, matte
Two coats
- Maker’s declaration
Steel table-top fasteners
Allow seasonal movement
Construction: mortise and tenon, breadboard ends.
How it was made
Boards picked from batch 7
12 January 2026
Mortise and tenon joints for the base
2 February 2026
First coat of oil
1 March 2026
Caring for it
Finish: hardwax oil, matte. The maker’s instructions come first.
- Wipe with a soft, slightly damp cloth and dry straight away.
- Use coasters and trivets. Wipe spills immediately.
- Refresh worn areas with a maintenance oil from the same system when water stops beading.
- Rags soaked in drying oils can self-heat: lay them flat to dry outdoors before disposal.
Warranty
2 years on materials and workmanship, including joints and finish defects not caused by use or environment. Transfers to future owners. This guarantee is in addition to your statutory rights.
Ownership
- Owner #1 since March 2026
Owners are never shown by name.
Issued by Northwood Studio
Serial 2026-017 · Record created March 2026
Mark location: shared with the owner only.